Matrix Pro ClearPath Receiver Update

This latest firmware version for TeeJet ClearPath receivers provides improved stability in GNSS positioning when operating in all SBAS environments
including EGNOS (Western & Central Europe), WAAS (North America), MSAS (Japan), & GAGAN (India). 

The ‘GPS Type’ setting on all supported Matrix Pro units will continue to support the same options as was supported before the update, but with improved stability when set to GPS/DGPS or DGPS. 

This update includes all the features and changes included in previous ClearPath receiver updates. 

Updating is an easy process that can be done using the USB port on the Matrix console, but it will require that the user select the appropriate update file
for the Matrix console they have. See below for more details.
 
NOTE: Using the wrong file will not damage the console, but it will also not update the receiver information.
This update is only supported for Matrix Pro G consoles running console v2.04, and Matrix Pro GS consoles running v3.04. If your console is running an older version, the console update can be downloaded from the Tech Support->Software/Firmware Updates section at www.teejet.com.

IMPORTANT: This update is only for Matrix Pro units in the following serial number ranges with ClearPath GNSS receivers running receiver versions  010016 (v1.016), 010102 (v1.102) or 010105 (v1.105). These units were shipped before approximately March 18, 2014. Units shipped after  approximately March 18, 2014, will already be running firmware 010201 (v1.201).

Serial Numbers to use ClearPathUPD1201_MatrixG.zip

Matrix Pro 570G w/ClearPath GPS:

Matrix Pro 840G w/ClearPath GPS

7530077xxxxx

7530084xxxxx

7530080xxxxx

7530090xxxxx

7530082xxxxx

7530093xxxxx

7530083xxxxx

7530105xxxxx

7530089xxxxx

7530106xxxxx

7530091xxxxx

7530092xxxxx

Serial Numbers to use ClearPathUPD1201_MatrixGS.zip

Matrix Pro 570GS w/ClearPath GPS:

Matrix Pro 840GS w/ClearPath GPS

7530094xxxxx

7530097xxxxx

7530095xxxxx

7530098xxxxx

7530107xxxxx

7530113xxxxx

7530109xxxxx

7530116xxxxx

7530110xxxxx

7530117xxxxx

7530111xxxxx

7530112xxxxx

7530121xxxxx

7530123xxxxx

Determine If Update Is Needed 
The best way to determine if your unit should be updated is to check the "Receiver" number and "Version" as shown. Go to Config->GPS->GPS Status Information and verify the values for "Receiver" and "Version". 

This update should only be used when the "Receiver" is 6 or 7 and the Version is reported as 010016, 010102 or 010105. 

Do not proceed with this update if: 
-  the "Receiver" is not 6 or 7 
-  the "Version" is not 010016, 010102 or 010105.

  

If you have any questions about whether or not you should update your unit, please contact Product Support at TeeJet Technologies for assistance. 

Dokumenty
Update to the firmware in the ClearPath GPS receiver to 010201 (v1.201) in the Matrix Pro G console (software v2.00 to v2.04).
Update to the firmware in the ClearPath GPS receiver to 010201 (v1.201) in the Matrix Pro GS console (software v2.5, v3.x and later).
Hledejte TeeJet.com

Hledejte tuto stránku
Hledejte technické dokumenty
Zvolte jazyk
Kde nakoupit